What Is a Timing Chain, and What Are Faulty Timing Chain Symptoms?

The Timing chain of an engine ensures that the motion of the engine’s components in the top half of the engine remains in sync with those in the bottom half of the engine.
The end of the camshaft, which is located in the upper portion of the engine, is where the timing chain is connected. The camshaft has a number of lobes all along its length.
These lobes are responsible for opening and closing the valves in the cylinder head as the camshaft rotates. This ensures that fuel and air are introduced into the combustion chamber at the appropriate times.
After the fuel and air have been compressed and ignited, the valves enable the exhaust gases to be released from the system.
The timing chain is also attached to the crankshaft at the bottom end of the engine. The crankshaft rotates and raises and lowers the pistons at precisely the right time in order to compress the fuel and air in the cylinders prior to ignition.

Difference Between Timing Belt Vs Timing Chain


Timing chains were lighter and more efficient than gear-driven timing systems, which led to their widespread replacement. However, during the 1970s and 1980s, toothed timing belts began to replace timing chains in many applications. Unlike timing chains, toothed timing belts did not require lubrication to function properly.

In spite of this, the timing chain has seen a resurgence in popularity over the course of the last couple of decades as a result of its increased durability and longer expected lifespan and it will not shows timing chain symptoms.
Timing chains also have a tendency to provide a significantly greater amount of warning before they break. They stretch slightly over time, which can cause the engine to run poorly or even backfire, which is a good sign that you should get the chain replaced as soon as possible. They can cause these timing chain symptoms and issues because they cause the engine to run poorly.

What Causes Timing Chain To Break?

What Causes Timing Chain To Break?

A rattling sound will also be produced by a timing chain that is worn out. Timing belts have a tendency to simply break, which can cause significant damage to the internal components of an engine in a split second. This occurs when the valves open at the wrong time and collide with the top of the rising piston.
To put it another way, such damage can frequently render an engine completely unusable, which is why the timing chain is gaining popularity once more.

What Are Faulty Timing Chain Symptoms? & How To Check Timing Chain

Timing Chain Symptoms

When a timing chain is worn, it will show signs of timing chain symptoms, which are indicators that the timing chain is not operating as it should be. These indicators are as follows:

1. Rattling Sound When Engine Is Started

When a vehicle has a timing chain that is not working properly, it will typically make an abnormal rattling noise when the engine is started or when the brakes are applied. When the engine is running, the timing chain can become loose or stretched out, causing it to shake and rattle as it rotates. This is the cause of the problem.

2. Misfiring Engine

Because the timing chain is responsible for timing the opening and closing of engine valves, any damage to the timing chain can result in an unbalanced air-fuel ratio and a loss of power. It seems to be jerking back and forth and there is a loss of acceleration.

3. Engine Oil Is Contaminated

Finding metal bits in the engine oil is another sign that something is wrong. It is possible for broken pieces of a timing chain to splinter off and fall into the oil below. This discovery should serve as a signal to the owner or the mechanic to perform an inspection of the timing chain.

4. Warning Light On The Dashboard

A timing chain that is not functioning properly will cause the check engine light to turn on, just like any other malfunctioning component of the engine. This is a warning to get your vehicle checked out by a mechanic for any underlying engine problems, one of which could be a broken timing chain.

5. Failure To Start The Vehicle’s Engine

This is an indication that the timing chain will eventually snap completely. The vehicle will not start, and there is a possibility that other engine components will also be damaged.
If these warning signs are picked up on in a timely manner, the impending failure of the timing chain can be averted by employing the appropriate maintenance and repair procedures. Call our auto repair shop as soon as possible if you have any reason to believe that the timing chain in your vehicle requires maintenance.

Read More 10 Tips For Making The Best Of Your Electric Vehicle

Timing Chain Replacement

Timing chain replacement can run you between $600 and $800 if you do it yourself, or between $1,600 and $1,800 if you hire a professional. Given how challenging it is to replace this element, the price is exorbitant. Timing chain replacement parts cost about $650 if you want to do it yourself.

Josh Phelix

A journalist and editor with a decade-long career in journalism and criticism,I'm a journalist who loves to write about Tech, Automobile,Entertainment,Sports and Finance things that are true. I love to tell stories that are meaningful and make you think.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button